Brand: SIEMENS
Category: Tumble Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for WT46W570
Uploaded: Nov. 21, 2025, 7:55 p.m.
Your new dryer
Congratulations - You have chosen a modern, high-quality Siemens domestic appliance. The condensation dryer with heat exchanger and automatic cleaning function is outstanding in terms of efficient energy consumption and low maintenance requirements. Every dryer which leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Intended use
- For domestic use only.
- Only to be used for drying fabrics that have been washed with water.
- Do not leave children unsupervised near the dryer.
- Keep pets away from the dryer.
Preparing for installation
! Never start the dryer if it is damaged! Inform your after-sales service.
Make sure your hands are dry. Hold the plug only.
Sorting and loading laundry
- Remove all items from pockets.
- Check for cigarette lighters.
- The drum must be empty prior to loading.
Congratulations - You have chosen a modern, high-quality Siemens domestic appliance. The condensation dryer with heat exchanger and automatic cleaning function is outstanding in terms of efficient energy consumption and low maintenance requirements. Every dryer which leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.
Intended use
- For domestic use only.
- Only to be used for drying fabrics that have been washed with water.
- Do not leave children unsupervised near the dryer.
- Keep pets away from the dryer.
Preparing for installation
! Never start the dryer if it is damaged! Inform your after-sales service.
Make sure your hands are dry. Hold the plug only.
Sorting and loading laundry
- Remove all items from pockets.
- Check for cigarette lighters.
- The drum must be empty prior to loading.
Troubleshooting and error codes
| What to do if ... | Possible cause | Remedy |
|---|---|---|
| The inicio/stop (Start/Stop) indicator lamp does not light up. | Mains plug plugged in? | |
| Programme selected? | ||
| The symbol and Start/Stop indicator lamp flash. | Check the socket fuse. | |
| The symbol and Start/Stop indicator lamp flash. | Empty the condensation container. | |
| Dryer does not start. | Clean the condensation container filter if necessary → Page 6. | |
| Clean the fluff filter → Page 4. | ||
| Water is leaking out. | inicio/stop (Start/Stop) button selected? | |
| Door closed? | ||
| The door opens by itself. | Programme set? | |
| The required degree of dryness was not achieved or the drying time was too long. | Ambient temperature greater than 5 °C? | |
| Make sure the dryer is level. | ||
| Push the door closed until you hear it engage. | ||
| Laundry damp. | Clean the fluff filter → Page 4. | |
| Empty condensation container → Page 4. | ||
| The moisture content of the room has increased significantly. | Ambient temperature higher than 35 °C → airing. | |
| Air inlet may be blocked → keep unobstructed. | ||
| Was an unsuitable programme selected? → Page 7. | ||
| Laundry too dry? The laundry in a dryer with a heat exchanger requires sufficient residual moisture. | ||
| Has the dryer been installed with sufficient space on all sides? Ensure that air can circulate. | ||
| Mains failure → Restart the dryer. | ||
| Fine layer of scale on the moisture sensors → Clean the moisture sensors → page 6. | ||
| Use the next drying programme up or use the timer programme as a supplement → Page 7. | ||
| Warm laundry feels damper than it really is! | ||
| Make sure the room is sufficiently ventilated. | ||
| Air inlet blocked? → keep unobstructed. | ||
| CIn appears in the display panel. | Not an error! Automatic cleaning of heat exchanger. | |
| Do not empty the condensation container. | ||
| Remove laundry from the dryer immediately and spread out. This allows the heat to dissipate. | ||
| Mains failure. | ||
| The interior light is not working. | Pull out the appliance plug, remove the cover cap in the interior above the door (use Torx 20 screw driver) and replace the bulb. Close the cover cap. Never operate the dryer without a cover cap. | |
| Other intermittent noises and vibrations. | Not an error! Automatic cleaning of the heat exchanger. | |
| Loud humming noise for several seconds. | Has the condensation container been properly reinserted? → slide the condensation container in fully. | |
| If you cannot rectify a fault yourself or a repair is necessary: | Turn the programme selector to stop (Off). | |
| Remove the appliance plug from the socket. | ||
| Call the after-sales service → see the after-sales service directory. |