Brand: SIEMENS
Category: Washing Machine
Document Type: Manual
Language: EN
Manual for XL 140
Uploaded: Nov. 21, 2025, 8:27 p.m.
Operating Instructions
Selecting a Programme
Turn the programme selector to the desired programme. The "On" control light will illuminate. Select the desired spin speed or "without G" for delicate items. Press the "Start" button to begin.
During Washing
The "Active" control light will remain illuminated throughout the programme. If you need to change the programme, turn the selector to "Off", then select the new programme and press "Start" again.
Cancelling a Programme
To stop a programme prematurely, turn the programme selector to "Pumping" or "Spin G", and then press "Start".
Programme End
The "End" control light will illuminate, and a signal will be emitted. Turn the programme selector to "Off". Unload the laundry, ensuring no foreign objects are left behind. Leave the door open to allow the machine to dry.
Troubleshooting and error codes
| Fault | Possible Cause | Remedy |
|---|---|---|
| Appliance does not switch on | Mains fuse is tripped/faulty. | Check mains fuse. |
| Washing programme does not start | The appliance has not been switched on. | Switch on the appliance. |
| "Start" button has not been pressed. | Press the "Start" button. | |
| The loading door is not closed. | Close the loading door securely. | |
| Water tap is turned off. | Turn on the water tap. | |
| Water is not entering the appliance | Water tap is turned off. | Turn on the water tap. |
| Supply hose is bent or kinked. | Straighten the supply hose. | |
| Supply hose is blocked. | Check and clean the strainer. | |
| Water is not being drained | Drain hose is bent or kinked. | Straighten the drain hose. |
| Drain hose is blocked. | Clean the drain hose. | |
| Siphon is blocked. | Clean the siphon. | |
| "Pumping" or "Spin G" not selected. | Select "Pumping" or "Spin G" programme. | |
| Appliance vibrates or is too noisy | Appliance is not level. | Level the appliance using the adjustable feet. |
| Transport bolts have not been removed. | Remove the transport bolts. | |
| Loading door is not properly closed. | Close the loading door. | |
| Load is too small or unevenly distributed. | Distribute the load evenly. Add more laundry if necessary. | |
| Flashing control lights | Possible operating fault. | Switch off appliance at the mains, wait 1 minute, then switch on again. If fault persists, contact customer service. |