Manual for SPSS 125 A1

Manual for SPSS 125 A1

Brand: SILVER CREST

Category: Audio

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:55 p.m.

Manual Publish Date: 2018-11-01

Warranty Information

This product comes with a 3-year warranty covering defects in material or manufacture.

  • Switching on/standby: Press the power button to turn the device on. Press again to return to standby mode.
  • Volume/Mute: Adjust volume using VOL-/+ buttons or the dial. Press MUTE to silence sound; press again to cancel.
  • Equalizer: Cycle through presets (flat, classic, rock, pop, jazz) using the EQ button.
  • Effect Lighting: Press LIGHT to select lighting programs; press again to turn off.
  • Radio: Press SOURCE to select FM radio mode. Tune stations using TUN-/+ buttons (briefly for intervals, hold for auto-scan). Store stations automatically with SCAN or manually with MEM. Select stored stations with M-/+ buttons. Switch between stereo/mono with MO/ST.
  • CD/USB Playback: Press SOURCE to select CD or USB mode. Use playback controls (play/pause, skip track, fast forward/rewind) as needed. Folders can be selected on MP3 media using FOLD.-/+ buttons. Program custom playlists using P-MODE. Set repeat or random playback using P-MODE. Display track information (MP3) with ID3.
  • Bluetooth: Press SOURCE until BT appears. Pair devices by enabling Bluetooth on both devices and following prompts. Control playback, volume, and tracks using device buttons or the remote.
  • Headphones: Connect headphones to the 3.5mm jack. Speakers will be disabled.
  • External Devices (AUX): Connect via AUX with a 3.5mm jack cable. Select AUX mode using SOURCE.

Troubleshooting and error codes

FaultPossible causeCorrective action
No sound The current volume is set too low. Increase the volume.
Mute setting is activated. Switch off the mute setting.
When the device is connected via AUX or Bluetooth: The volume of the external device is too low. Increase the volume on the external device.
Headphones are connected. The sound playback on the speakers is interrupted if headphones are connected. Unplug the headphone jack plug from the headphone socket.
No or poor radio reception The station signals are too weak. Adjust the frequency of the stations. Move the radio to a different location or change the direction of the aerial to improve the reception, if necessary.
CD is not played. Condensation has formed. Pull the mains plug out of the mains outlet and wait until the device and the CD has adapted to the environmental conditions.
Incorrect CD format. The device only supports the CD formats specified in the technical data.
The CD is dirty or incorrectly inserted. Clean the CD and insert it into the CD compartment with the label facing upwards.
No function The mains plug is not inserted correctly. Check if the mains plug is inserted in the outlet correctly.
The device is disrupted by a thunderstorm, static charge or another external factor. Pull the mains plug out of the outlet and then plug it in again.
Privacy Policy