Brand: SILVER CREST
Category: Electronics
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HG01910B
Uploaded: Nov. 21, 2025, 6:45 p.m.
Manual Publish Date: 2016-12-01
Warranty Information
This product comes with a 3-year warranty from the date of purchase covering material or manufacturing defects.
Installing Batteries: For the receiver, remove the battery compartment cover (9) and insert 2 x 1.5V AA batteries, observing polarity. For the transmitter, remove the mounting bracket (15), insert 1 x 3V CR2032 battery with the '+' side up, and reattach the bracket.
Synchronizing: Upon battery insertion, the receiver enters sync mode. Alternatively, press and hold the sync button (2) for 3 seconds. Press the doorbell button (13) on the transmitter; the signal indicator (11) lights up once. The receiver's signal indicator (1) will blink, confirming successful synchronization.
Setting Options: Use the signal type selector (5) for optical, acoustic, or both signals. Adjust volume using the volume button (3) through four levels. Select from 36 melodies using the chime selection button (4).
Troubleshooting: If the product malfunctions, remove batteries from both units for 2 minutes, then resynchronize.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Product malfunctions | Exceptional environmental conditions (e.g., strong electromagnetic field) | Remove batteries from both units for 2 minutes. Resynchronize sender and receiver. |
| Product malfunctions | Electrostatic discharge | Temporarily remove and reinsert the battery. Resynchronize sender and receiver. |