Brand: SILVER CREST
Category: Electronics
Document Type: Manual
Language: EN
Manual for SPBL 10000 C3
Uploaded: Nov. 21, 2025, 9:19 p.m.
Manual Publish Date: 2019-05-01
Warranty Information
This product comes with a 3-year warranty against material or manufacturing defects.
- Charge the power bank using a 5V/3A power supply.
- Connect your mobile device to one of the power bank's USB outputs using a suitable cable.
- The display shows the remaining battery percentage.
- Press the power button briefly to check the battery level.
- Press the power button twice to turn off the power bank.
Troubleshooting and error codes
| Problem | Cause | Solution |
|---|---|---|
| The power bank is not charging. | Connection may be faulty. | Check the connection. A power supply of 5V and at least 3A is required. |
| A connected device is not charging. | The battery is empty. | Charge the battery. |
| No connection to the device. | The device is not connected. | Ensure it is connected. Press the on/off button briefly to start charging. |
| The connected device's current consumption is too low. | N/A | Check the manual of the connected device to ensure its current consumption is compatible. Minimum discharge current is approx. 60mA. |
| The power bank does not respond to button presses or when a device is connected, even if the battery is charged. | The connected device's current consumption is too high, triggering the overcurrent protection. | Reduce the number of connected devices and press the on/off button. |