Brand: SILVER CREST
Category: Kitchen Appliances
Document Type: Manual
Language: EN
Manual for SIKP 2000 C1
Uploaded: Nov. 21, 2025, 8:46 p.m.
Manual Publish Date: 2014-12-01
Warranty Information
This device comes with a three-year warranty from the date of purchase.
- Connect the hotplate to a power outlet.
- Place suitable cookware on the heating zone.
- Press the On/Off button to switch on the hotplate.
- Adjust power level or temperature using the rotary controller or function buttons.
- Use the timer function to set an automatic switch-off time.
- Switch off the hotplate by pressing the On/Off button.
Troubleshooting and error codes
| Problem | Possible causes | Remedy |
|---|---|---|
| Induction hotplate not working | Mains cable not connected | Connect the mains cable to a live wall socket. |
| Child lock activated. | Press and hold the button (10) for 3 seconds to deactivate the child lock. | |
| Heating zone not getting hot | No pan on the heating zone (2) | Place a pan on the heating zone (2). |
| Cookware not suitable for induction | Only use cookware which is suitable for induction hotplates. | |
| Error EO is shown on the display (3) | No pan on the heating zone (2) | Place a pan on the heating zone (2). |
| Cookware not suitable for induction | Only use cookware which is suitable for induction hotplates. | |
| Cookware is too small in diameter or not standing centrally on the heating zone (2). | Only use cookware with a diameter of between 16 and 26 cm and place it on the centre of the heating zone. | |
| Error E5 is shown on the display (3) | Hotplate temperature too high | Wait a few minutes until the heating zone has cooled down. |
| Empty pan | Fill the pan with food. | |
| Error E6 is shown on the display (3) | Cooling fan faulty | Contact our hotline. See the "Guarantee information" on page 62. |
| Error E1, E2, E3 or E4 is shown on the display (3) | Technical fault | Contact our hotline. See the "Guarantee information" on page 62. |