Brand: SilverCrest
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SSBS 36 A1
Uploaded: Nov. 21, 2025, 7:23 p.m.
Manual Publish Date: 2016-07-06
Warranty Information
This product comes with a 3-year warranty from the date of purchase.
- Connect the power unit to a wall socket. The red LED indicates standby mode.
- Press the POWER button to switch the device on or to standby.
- Select the desired input using the AUX, LINE IN, HDMI (ARC), OPTICAL, or Bluetooth buttons on the remote control or device.
- Control volume using the VOL -/+ buttons. Press MUTE to silence the sound temporarily.
- Adjust sound settings like treble, bass, and tone quality (Music, Movie, Dialog) using the respective buttons.
- To connect via Bluetooth, press the Bluetooth button until the LED flashes blue, then pair your device.
- To connect via HDMI (ARC), ensure both the TV and cable are ARC-compatible.
Troubleshooting and error codes
| Fault | Possible causes / Action |
|---|---|
| No function | Is the device connected to the power supply? Is the LED 1 lit up? |
| For HDMI ARC connection, ensure HDMI cable and connected device are ARC-enabled. Switch to a different connection type or replace TV if not ARC-enabled. | |
| Replace old HDMI cable with a new, ARC-enabled one. | |
| Is the correct audio signal selected on the audio device (e.g., PCM 2.0 or PCM stereo)? | |
| Is the Bluetooth function of the audio device active? | |
| No Bluetooth connection | Did you switch off the device? Does a Bluetooth connection to another device exist? Press the Bluetooth button or PAIR button until the blue LED flashes, then establish the new connection. |
| No music playback | Is the volume set too low on the audio device? Have you selected the correct connection? Is the volume too low or switched off? |
| Interferences during operation | If interferences occur, remove mobile phones, tablets, or other wireless devices from the vicinity of the soundbase. |