Manual for SFS 52 B2

Operation

Check the package contents

The scope of delivery includes: 1 x receiver, 1 x transmitter, 1 x 3V battery, 5 x name plates, 2 x wall plugs with screws, 1 x double-sided adhesive tape, and operating instructions.

Remove all parts from packaging and check for completeness and visible damage.

Disposal of packaging materials

Dispose of packaging materials according to local regulations.

Inserting/replacing the batteries

Open the battery compartment by inserting a coin and turning the cover counterclockwise. Insert a CR2032 battery with the positive pole upwards. Replace the cover and lock it clockwise.

Handling and operation

Selecting the signal type

Use the signal type switch to select acoustic only, optical only, or optical and acoustic signal.

Adjusting the signal sound volume

Press the VOL button repeatedly to set the desired volume (Loud, Medium, Quiet).

Selecting the doorbell melody

Press the melody select button to cycle through 52 melodies. Stop when you hear the desired melody.

Synchronizing the transmitter and receiver

Press the synchronization button on the receiver, then press the doorbell button on the transmitter. The receiver will notify if synchronization is successful.

Mounting the transmitter

Select a position, mark drill holes using the mounting plate, drill holes, insert anchors, and screw the mounting plate to the wall. Push the transmitter onto the plate until it clicks.

Alternatively, use double-sided adhesive tape.

Maintenance

The appliance is maintenance-free. Contact customer service for malfunctions or damage. Remove batteries if not in use for an extended period.