Brand: SilverCrest
Category: Electronics
Document Type: Manual
Language: EN
Manual for SHDP 5.1 A1
Uploaded: Nov. 21, 2025, 7:43 p.m.
Warranty Information
This appliance has a 3-year warranty from the date of purchase, covering material and manufacturing defects.
- Setup: Remove protective foil, place on a flat surface, connect to TV and audio components before plugging into power.
- Power On/Off: Use the POWER switch on the rear and the STANDBY button on the remote or device.
- Disc Playback: Open/close tray, insert disc, press PLAY/PAUSE. Navigate using menus and control buttons.
- Media Playback (USB/Memory Card): Insert media, press USB button until desired source is shown, navigate and play files.
- OSD Menu: Press SETUP to access settings for display, audio, video, and preferences.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank/DVD player shows no functions even though it is switched on | Power cable not inserted properly. | Check power cable insertion. Plug into a live socket or test with another device. |
| Display dimmer function is off. | Press DIMMER button on remote. | |
| Device needs to be reset. | Switch off using POWER switch, wait ten seconds, then switch on again. | |
| Display shows "NO DISC" even though there is a disc inserted | Disc is dirty, scratched, or damaged. | Clean the disc or insert another disc. |
| Country/Region code mismatch. | Ensure the disc's country code matches the DVD player's. | |
| Inserted disc will not playback | Condensation on laser lens. | Place DVD player in a dry environment, remove disc, and leave off for at least one hour. |
| No image or Black/White image only | Connection cables not firmly inserted. | Check all connection cables between DVD player and TV/projector. |
| OSD menu settings do not match connection. | Verify OSD menu settings in chapter 8. Consult TV/projector manual. | |
| No sound | TV or DVD player muted. | Check for mute settings. |
| Audio connection cables not firmly inserted. | Check all connection cables between DVD player and audio components. | |
| OSD menu settings do not match audio connection. | Verify OSD menu settings in chapter 9. Consult TV/projector and audio component manuals. | |
| Incorrect front speaker setting. | In OSD menu AUDIO, set FRONT SPEAKER to LARGE. | |
| No 4:3 or 16:9 image | TV has limited image formats. | Check TV's image formats. |
| OSD menu settings do not match TV's image format. | Verify OSD menu settings for image format. | |
| Remote control not functioning | Batteries inserted incorrectly or exhausted. | Check battery polarity and replace if necessary. |
| Obstruction between remote and player. | Ensure no obstructions and stay within 5 meters. | |
| Playback language/ Subtitle language do not correspond to OSD settings | Language not available on the disc. | The selected language is not supported by the inserted disc. |
| One or several functions can not be switched on | Function not available on the disc. | The symbol appears if a function is not available. |
| None of the buttons on the device or remote control are functioning/other malfunctions | Device needs reset. | Switch off using POWER, wait ten seconds, then switch on again. |
| Default settings need to be restored. | Perform a factory reset as described in chapter 10.6. |