Brand: SilverCrest
Category: Home Appliances
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for IAN 284705
Uploaded: Nov. 21, 2025, 7:48 p.m.
Warranty Information
3-year guarantee from date of purchase for material or workmanship faults.
Remote Control Setup: Open battery compartment, insert CR 2032 battery (+ up). Close compartment. Press ON/OFF button to test; indicator light should illuminate.
Socket Setup: Plug socket into earthed outlet. LED will flash for 30 secs. Aim remote at socket (approx. 50cm). Press desired ON button (A,B,C,D) while LED flashes. LED will light continuously. Device is now ready for use.
Using the Socket: Plug device into socket, switch device on. Socket only functions when controlled device is on. Max load 3,680W. Do not connect appliances that could cause fire if left unattended.
Using the Remote: Press ON button for desired channel to switch on. Press OFF button to switch off. Press ALL ON/OFF to control all sockets simultaneously.
Socket Setup: Plug socket into earthed outlet. LED will flash for 30 secs. Aim remote at socket (approx. 50cm). Press desired ON button (A,B,C,D) while LED flashes. LED will light continuously. Device is now ready for use.
Using the Socket: Plug device into socket, switch device on. Socket only functions when controlled device is on. Max load 3,680W. Do not connect appliances that could cause fire if left unattended.
Using the Remote: Press ON button for desired channel to switch on. Press OFF button to switch off. Press ALL ON/OFF to control all sockets simultaneously.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Operating indicator light on remote illuminates, but no reaction | Check battery amperage. If necessary, install a new battery. |
| No indicator light on remote when pressing ON or OFF | Check battery insertion. Check battery contact and press down if necessary. |
| No reaction from consumer | Assign a new code to the socket. Check if consumer is switched on. Check range by moving closer. |
| Range is too small | Ensure minimal walls/furniture between remote and socket. Interference from devices on similar frequencies (e.g., wireless headphones) can reduce range. |