Parts/Service for DVP-CX995V

Parts/Service for DVP-CX995V

Brand: SONY

Category: Audio

Document Type: Parts/Service

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 9:02 p.m.

Manual Publish Date: 2005-12-01

Warranty Information

Warranty information is not specified in the provided document.

Operation Summary

  • Disc Playback: Plays DVD VIDEO, DVD-RW, Super Audio CD, VIDEO CD, and Music CD formats. Supports MP3 and JPEG files on CDs conforming to ISO 9660.
  • Region Code: DVD VIDEO playback is restricted to discs with matching region codes printed on the back of the unit.
  • Copyright Protection: Supports copyright protection technologies but may not play discs with certain types of protection.
  • Display Functions: Front panel display shows disc type, playing status, current mode, and time.
  • Controls: Features buttons on the front panel and a remote commander for playback, menu navigation, and setup.
  • Connections: Includes HDMI, Component Video, S-Video, Line Video, Digital Optical and Coaxial Audio outputs, and 5.1 Channel Audio outputs.
  • Test Mode: Allows for diagnosis and adjustment using the remote commander and TV display, with functions like B/E Diagnosis, Drive Auto Adjustment, and Version Information.

Troubleshooting and error codes

Problem Possible Cause Solution
Safety Check-Out After repair, check antenna terminals, metal trim, knobs, screws, and all exposed metal parts for AC leakage. Leakage current must not exceed 0.5 mA.
Notes on Chip Component Replacement Never reuse disconnected chip components. Be careful of heat damage to tantalum capacitors.
Flexible Circuit Board Repairing Keep soldering iron temperature around 270°C. Do not touch the same conductor with the iron for extended periods. Avoid applying force when soldering/unsoldering.
Unleaded Solder Boards marked with LF require unleaded solder. Unleaded solder melts at a higher temperature and is more viscous. Soldering irons should be set to about 350°C. Avoid prolonged heating to prevent copper foil peeling.
Notes on Laser Diode Emission Check Observe from more than 30 cm away from the objective lens.
Notes on MB Board Replacement
  • New flash memory (IC202) on MB board may not be usable; exchange with previous memory.
  • After replacing the MB board, perform "Drive Auto Adjustment" in Test Mode to initialize memory.
Notes on AV Board Handling When replacing AV board, destroy IC600 physically before disposal.
Privacy Policy