Simple Start Guide

Quick Overview

A quick overview presented in this guide will give you enough information to start using the player for your enjoyment. To use the surround sound features of this player, refer to "Hookups" on page 18.

Step 1: Unpacking

Check that you have the following items:

Audio/video cord (pinplug × 3 → pinplug × 3) (1)
Remote commander (remote) (1)
Size AA (R6) batteries (2)
A plug adapter is included with some models.

Step 2: Inserting Batteries into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the ⊕ and ⊒ ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor ⌚ on the player.

Step 3: TV Hookups

Connect the supplied audio/video cord and the power cord in the order (1~3) shown below. Be sure to connect the power cord last.

Step 4: Playing a Disc

Turn on the TV.
Press ⍟ on the player.
Switch the input selector on your TV so that the signal from the player appears on the TV screen.
Press ⌜ on the player to open the disc tray.
Place the disc on the tray with the playback side facing down.
Press ▶. The disc tray closes and the player begins playing the disc.

Hookups

Follow Steps 1 to 4 to hook up and adjust the settings of the player. Before you start, disconnect the power cords, check that you have all of the supplied accessories, and insert the batteries into the remote (page 15).

First three characters of the service number	Cause and/or corrective action
C 13	The disc is dirty. Clean the disc with a soft cloth (page 8).
C 31	The disc is not inserted correctly. Re-insert the disc correctly.
E XX (xx is a number)	To prevent a malfunction, the player has performed the self-diagnosis function. Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10

Manual for DVP-NC615

Warranty Information