Brand: SONY
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 7:33 p.m.
None
| Troubleshooting | See |
| The receiver is turned off automatically. | page 52, 13 |
| No image appears on the TV. | page 31, 17 |
| No 3D image appears on the TV. | page 25 |
| When the receiver is in standby mode, there is no image output from the TV. | page 51 |
| Recording cannot be carried out. | page 31 |
| There is no sound, no matter which equipment is selected, or only a very low-level sound is heard. | page 30, 31 |
| There is severe hum or noise. | page 17 |
| There is no sound, or only a very low-level sound is heard from specific speakers. | page 30 |
| The left and right sounds are unbalanced or reversed. | page 30 |
| Dolby Digital or DTS multi channel sound is not reproduced. | page 52 |
| The surround effect cannot be obtained. | page 40 |
| Recording cannot be carried out. | page 31 |
| When the receiver is in standby mode, there is no sound output from the TV. | page 51 |
| The FM reception is poor. | page 28 |
| Radio stations cannot be tuned in. | page 37, 38 |
| Are you using a supported USB device? | page 33 |
| There is noise, skipping, or distorted sound. | page 29 |
| The USB device is not recognized. | page 33 |
| Playback does not start. | page 33 |
| The USB device cannot be connected into the (USB) port. | page 29 |
| Erroneous display. | page 29 |
| "READING" is displayed for an extended time, or it takes a long time before playback starts. | page 29 |
| Audio file cannot be played back. | page 29 |
| "BRAVIA" Sync (Control for HDMI) | page 24 |
| The Control for HDMI function does not work. | page 43, 51 |
| Remote control | page 6, 12 |
| The remote control does not function. | page 30 |
| Error messages | page 35 |
| PROTECT | page 30 |
| USB FAIL | page 30 |