Brand: SONY
Category: Audio
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for HT-S40R
Uploaded: Nov. 21, 2025, 6:33 p.m.
Warranty Information
Consult your dealer for warranty information specific to your region and product.
Basic Setup
Connect the bar speaker, surround speakers, and wireless amplifier according to the installation guide. Mount the speakers and amplifier on a wall if desired. Connect to your TV via HDMI ARC or optical cable for audio input.
Listening to Audio
TV: Press INPUT on the remote to select [TV]. Adjust volume using +/- buttons. Subwoofer volume can be adjusted with SW +/-.
USB: Connect a USB device to the USB port. Press INPUT to select [USB]. Browse content and select for playback. Adjust volume as needed.
Bluetooth: Press and hold the BLUETOOTH button on the subwoofer to enter pairing mode. Search for "HT-S40R" on your mobile device and pair. Play audio from your device and adjust volume.
Settings: Use the MENU button to access settings for sound modes, brightness, and other system preferences.
Troubleshooting and error codes
| Symptom | Cause | Remedy |
|---|---|---|
| [PROTECT] appears, sound is muted, buttons (except power) are unresponsive. | Protection feature activated. | Press ⌛ (power) to turn off, disconnect AC power cord, check ventilation, and try again. If using USB, remove USB device. |
| Front panel display is not lit. | Brightness setting is OFF. | Press DIMMER to set to [BRIGHT] or [DARK]. |
| TV sensors do not work properly. | Bar speaker is blocking sensors. | Move bar speaker away from TV. |
| Wireless function is unstable. | Metal objects near the system. | Do not place metal objects near the speaker system. |
| [DEMO] appears, system not working properly. | Demo mode is active. | Reset the speaker system by pressing and holding ⌛ (power) and volume buttons for over 5 seconds. |
| No sound from TV after switching from USB input. | Input selection issue. | Select TV program using TV remote. |