Manual for CPD-G500

Name: Manual for CPD-G500
Brand: SONY
Availability: InStock

Brand: SONY

Category: Computer

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: Nov. 21, 2025, 6:05 p.m.

Warranty Information

Warranty information is not explicitly stated in the provided pages.

Setup

Connect the monitor to your computer using the appropriate cables (HD15 or BNC).
Connect the power cord to the monitor and a power outlet.
Turn on the monitor first, then the computer.
Select the on-screen menu language (LANG) and input signal if needed.
Customize your monitor's settings such as brightness, contrast, size, and color using the on-screen menu and control button.

Customizing Your Monitor

Use the control button to navigate the on-screen menus (MENU, SIZE/CENTER, GEOM, CONV, SCREEN, COLOR, OPTION, EXIT) to adjust various picture quality settings.

Troubleshooting

Refer to the troubleshooting section for common issues like thin lines, no input signal, or out of scan range. Use the self-diagnosis function if problems persist.

Troubleshooting and error codes

Symptom	Check these items
No picture	• Check power cord and switch. • Check video signal cable connections. • Check INPUT switch setting. • Check HD15 connector pins.
NO INPUT SIGNAL or orange power indicator	• Computer in power saving mode (press a key). • Check computer power is on. • Ensure graphic board is seated properly.
OUT OF SCAN RANGE	• Check video frequency range against monitor specifications. • If replacing an old monitor, reconnect it and adjust frequency. • Use Self-diagnosis function.
No message, green or flashing orange power indicator	• If using Windows 95/98: Reconnect old monitor, install Monitor Information Disk, select monitor model or Plug & Play, use HD15 cable.
Picture flickers, bounces, oscillates, or is scrambled	• Isolate and eliminate sources of electric/magnetic fields. • Move monitor away from power lines. • Try a different AC outlet. • Rotate monitor 90°.
Picture is fuzzy	• Check graphics board manual. • Confirm graphics mode and frequency. • Adjust computer refresh rate. • Adjust brightness and contrast. • Degauss monitor. • Check CANCEL MOIRE setting.