Brand: SONY
Category: Computer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SCPH-10281/97043
Uploaded: Nov. 21, 2025, 7:29 p.m.
Warranty Information
This product is warranted for 90 days against defects in materials and workmanship.
USE
Power sources: Operate the unit using only the indicated type of power source. Consult your dealer or local power company if unsure.
Grounding or polarization: The unit has a polarized AC power cord plug that fits into the outlet only one way. Do not force it; contact an electrician if it doesn't fit.
Overloading: Do not overload outlets or extension cords to prevent fire or electric shock.
Liquid and foreign objects: Never insert objects into openings or spill liquids on the unit to avoid fire, electric shock, or damage.
Attachments: Use only manufacturer-recommended attachments.
Cleaning: Unplug the unit before cleaning. Use a lightly dampened cloth with water; avoid liquid or aerosol cleaners.
INSTALLATION
Water and moisture: Do not use the unit near water.
Power cord protection: Route the power cord to avoid it being walked on or pinched.
Ventilation: Do not block the slots and openings. Keep them clear for airflow.
Accessories
Placement: Do not place the unit on unstable surfaces. Use only manufacturer-recommended carts, stands, etc. Move appliances and carts with care. Avoid confined spaces without proper ventilation. Do not place near heat sources or direct sunlight.
Troubleshooting and error codes
| Problem | Possible Solutions |
|---|---|
| Cannot establish a network connection (Ethernet or modem). | - Ensure the PlayStation®2 console power plug is firmly inserted into the outlet. - Verify the network adaptor is correctly installed in the console. - Insert a PlayStation®2 format software disc compatible with the network adaptor. - Ensure you are using compatible PlayStation®2 format software. - Check and adjust network configuration settings. - Wait a few minutes and try accessing the network again if it's busy. |
| Cannot establish a network connection (Ethernet only). | - Ensure the network connection cable is connected correctly. - Use the appropriate type of network cable (100Base-TX or 10Base-T). - Check and adjust network device (router, DSL modem, etc.) settings. |
| Cannot establish a network connection (Modem only). | - Ensure the telephone cord is connected correctly. - Verify the telephone line is not in use. - Use a residential telephone line (PBX or commercial lines are not supported). - Ensure your software is compatible with your internet service provider. |
| Slow data transmission speed (Modem only). | - Minimize interference from electrical appliances. - Avoid general-use extension cords or cords connected to other devices. - Check for interference between your home and the telephone company. |
| Connection fails suddenly (Modem only). | - Temporarily disable call waiting. - Contact your local telephone company for assistance. |
| Cannot connect, and after repeated attempts, the modem stops dialing (Modem only). | - There are limitations on the number of redial attempts. Turn off the console, wait a few minutes, and try again. |