Brand: SONY
Category: Navigation Device
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for NVX-P1
Uploaded: Nov. 21, 2025, 6:35 p.m.
Warranty Information
No guarantee is provided for lost or damaged data.
Getting Started:
- Check package contents.
- Install the unit securely using the suction mount, ensuring clear visibility.
- Familiarize yourself with the controls on the front, rear, and card remote commander.
- Turn the unit on by pressing and holding the power button.
- Select language and accept the warning message to start navigation.
Basic Operations:
- Access the main menu and navigate through options using the arrow keys and OK button.
- Use the keyboard for text input, with different modes for alphabet, alternate, and number/symbol.
Route Searching:
- Set destinations by address, POI, or Favourites.
- Route guidance includes 2D and 3D map displays, next turn information, and warnings.
Advanced Features:
- Create Multi-stop Trips and avoid specific areas.
- Use the 2D pop-up menu for quick access to navigation functions.
- NVX-P1 Desktop allows map management, custom POI creation, and software updates.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Buttons do not work. | The unit is displaying a map. | Wait a moment; operation may be delayed when a map is displayed. |
| Unit does not turn on. | The ignition switch is OFF. | Turn the ignition switch to ON. |
| The car battery adapter is not properly connected. | Check the connection between the car battery adapter and the cigarette lighter socket. | |
| Ambient temperature is too high. | The protection circuit may be activated. Allow the unit to cool down before turning it on. | |
| The fuse in the car battery adapter is blown. | Check the fuse in the car battery adapter. | |
| Card remote commander does not work. | Obstruction between the remote commander and the unit. | Ensure there is a clear line of sight. |
| The distance is too great. | Move closer to the unit. | |
| The remote commander is not pointed correctly. | Point the remote commander towards the unit's receiver. | |
| The battery is weak. | Replace the battery (CR2025 lithium battery). | |
| GPS signal cannot be received. | Obstruction or poor signal reception. | Move the car to an area with a clear signal. Use an external GPS antenna if necessary (for heated or IR-resistant windshields). Ensure the GPS receiver is pulled out to the horizontal position. Avoid attaching films to the windshield that may block signals. |
| GPS receiver is obstructed by the car's bodywork. | Install the unit where the signal is not blocked. | |
| Car's position on map does not match actual street. | GPS signal margin of error. | Wait for the unit to acquire an accurate position. |
| Voice guidance cannot be heard. | Volume is set too low. | Press and hold the VOL +/- buttons on the unit or remote commander. |
| LCD screen is too bright/dim. | Automatic brightness adjustment due to ambient temperature. | The unit adjusts brightness automatically. If extreme temperatures occur, a message may appear, and the unit may activate heating or shut off. |