Brand: Sricam
Category: Security Camera
Document Type: Quick Start Guide
Language: EN
Available Languages: EN , ES
Quick Start Guide for SP017
Uploaded: April 20, 2026, 8:08 p.m.
Warranty Information
Refer to the website for detailed warranty information.
Product Introduction
- Identifies components like IR Sensor, Lens, IR LED, MicroSD Card Slot, Network Interface, and Power Interface.Hardware Installation
- Mount the camera using provided screws. - Loosen thumb screws to adjust position and then tighten.Before starting setup
- Ensure router supports 2.4GHz band and DHCP is enabled. - Connect smartphone to Wi-Fi network compatible with the camera. - Know your Wi-Fi password (no special characters). - Keep smartphone, camera, and router within 8 feet during setup.Start setup
- Connect camera to power and network. - Reset the camera to default settings by pressing the RESET button. - Download the "Sricam" App by scanning QR code or searching the app store. - Register a user account or log in. - Add the camera by inputting its Device ID and password. - Change the admin password for security. - Configure Wi-Fi settings if needed. - View live video stream on your smartphone.Troubleshooting and error codes
| Issue | Solution |
| Camera not found in step 4-4 | Ensure step 1-3 (reset) has been completed and wait 30 seconds. |
| Inconsistent signal | 1) Too many devices sharing the network. 2) Camera is too far from the router (for Wi-Fi). |
| Failed to setup Wi-Fi in step 4-7 | Ensure smartphone is not connected to a 5G Wi-Fi signal. Reconnect to a non-5G Wi-Fi or skip and set up via "settings" > "Network Setting". |
| Other quality/setup issues | Reset the camera by inserting a pin until a click sound is heard. |