Brand: STOREX
Category: Digital Camera
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for CHD5003S
Uploaded: Aug. 10, 2025, 12:53 a.m.
Warranty Information
STOREX offers a 1-year guarantee for the product and 3 months for accessories, covering manufacturing faults.
CAMERA DETAILS
The camera features various buttons and ports for operation: Shutter/Select Button, Microphone, MicroSD Slot, Charging Status Light, Power/Mode Button, Wi-Fi indicator, Lens, Micro HDMI Port, LCD Screen, Speaker, and Down/Wi-Fi Button.
MODES: Video (Record Video), Photo (Capture a single photo), Burst Photo (Capture photo bursts), Time Lapse (Shoot a series of photos at set time intervals), Settings (Adjust camera settings, resolution and more).
USING YOUR CAMERA 1. Insert a micro SD or micro SDHC card (Class 4 or higher recommended, Class 10 for time delay and professional mode). 2. Charge the battery using the USB cable. The status indicator (blue) lights up during charging and turns off when complete. Note: The camera will not charge if it is on. 3. Turn on by pressing and holding the Power/Mode Button for 3 seconds. Turn off similarly. 4. To start recording video, ensure the camera is in Video mode and press the Shutter/Select Button. The camera will beep and the status lights will flash. 5. To stop recording, press the Shutter/Select Button again. The camera will beep, and status lights will stop flashing. 6. To take a photo, ensure the camera is in Photo mode and press the Shutter/Select Button.
WATERPROOF CASE Ensure the rubber seal is clean before closing the case. Test by submerging the closed case in water for a minute. After use in salt water, rinse and dry the housing. Clean the seal with fresh water and air dry.
MODES: Video (Record Video), Photo (Capture a single photo), Burst Photo (Capture photo bursts), Time Lapse (Shoot a series of photos at set time intervals), Settings (Adjust camera settings, resolution and more).
USING YOUR CAMERA 1. Insert a micro SD or micro SDHC card (Class 4 or higher recommended, Class 10 for time delay and professional mode). 2. Charge the battery using the USB cable. The status indicator (blue) lights up during charging and turns off when complete. Note: The camera will not charge if it is on. 3. Turn on by pressing and holding the Power/Mode Button for 3 seconds. Turn off similarly. 4. To start recording video, ensure the camera is in Video mode and press the Shutter/Select Button. The camera will beep and the status lights will flash. 5. To stop recording, press the Shutter/Select Button again. The camera will beep, and status lights will stop flashing. 6. To take a photo, ensure the camera is in Photo mode and press the Shutter/Select Button.
WATERPROOF CASE Ensure the rubber seal is clean before closing the case. Test by submerging the closed case in water for a minute. After use in salt water, rinse and dry the housing. Clean the seal with fresh water and air dry.
Troubleshooting and error codes
| TROUBLESHOOTING | Refer all troubleshooting to qualified personnel. Troubleshooting is required when the appliance has been damaged in any way: plug or cord is damaged, liquid spilled into the product, introduction of small objects in the product, exposure to rain or moisture, malfunction, drop of the product... |
|---|---|
| IMPORTANT NOTE | At full volume, for an extended period of time can damage your hearing. It is illegal to download music from the Internet without having bought the rights. STOREX is not responsible for the use of the STOREX product with illegal music downloading. |