Brand: Terraillon
Category: Health & Wellness
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for LT1102H
Uploaded: April 20, 2026, 8:02 p.m.
Warranty Information
This product is guaranteed against defects in materials and workmanship for 24 months.
Easy Care Device Operation
Step 1: Preparation
Cleanse your skin, especially avoiding areas with dense hair. Ensure skin is dry before proceeding.
Step 2: Electrode Attachment
Connect the electrode(s) to the electro-stimulator. Ensure the device is OFF before connecting. Attach electrodes to the device.
Step 3: Electrode Placement
Remove the protective film from the back of the electrode. Place electrodes on the treatment area (refer to placement diagrams). Ensure skin is clean, dry, and healthy.
Step 4: Device Power-On
Press the power button to turn on the device.
Step 5: Program Selection
Cycle through the TENS/EMS/MASS modes by pressing the power button. Confirm your selection by pressing the (-) button. The selected mode will blink.
Step 6: Treatment and Intensity Adjustment
Press the (+) button to start the treatment. Adjust intensity using the (+) or (-) buttons. The maximum intensity level is 15. The device will automatically turn off when the program ends.
Step 7: Device Power-Off
Press and hold the power button for two seconds to turn off the device. It will also turn off automatically after three minutes of inactivity.
Troubleshooting and error codes
| PROBLEM | POSSIBLE CAUSES | POSSIBLE SOLUTION |
|---|---|---|
| The unit does not turn on. | Are the batteries depleted? | Replace the batteries. |
| Are the batteries inserted correctly? | Insert the batteries respecting the polarity. | |
| Stimulation is weak or imperceptible. | The electrodes are dry or dirty. | Replace the electrodes with new ones. |
| The electrodes do not adhere well to the skin. | Replace the electrodes with new ones. | |
| Electrodes poorly positioned. | Turn off the device, reposition the electrode on your skin, then turn it back on. | |
| Stimulation is unpleasant. | The intensity is too high. | Decrease the intensity. |
| Is the device being used in accordance with the manual? | Consult the manual before using the device. |