Brand: TOSHIBA
Category: Air Conditioner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for RAC-PD0812CRRU
Uploaded: Nov. 21, 2025, 6:08 p.m.
Manual Publish Date: 2022-09-01
Warranty Information
This manual does not contain specific warranty period information.
Operation Summary
- Cool Operation: Set desired temperature and fan speed.
- Dry Operation: For dehumidifying, keep windows closed. Fan operates at low speed, temperature cannot be adjusted.
- Fan Operation: Select fan speed. Temperature cannot be adjusted.
- AUTO Operation: Unit automatically selects cooling, heating, or fan mode based on room temperature and set point.
- Heat Operation (Heat Pump Models Only): Set desired temperature and fan speed.
- Timer: Set Auto Start/Stop times for the unit.
- Sleep Operation: Energy saving during sleep hours.
- Swing: Controls louver movement for airflow direction.
- MyTemp: Remote control measures room temperature for optimized comfort.
- Short Cut: Restores or saves previous settings.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| Unit does not turn on when pressing ON/OFF button | Displays P1 Error Code and means the water collection tray is full. Turn off the unit, drain the water from the water collection tray, and restart the unit. |
| Unit does not cool well | If room temperature is lower than the set temperature in COOL mode, reset the temperature. |
| The air filter is blocked with dust or animal hair. Turn off the unit and clean the filter according to the instructions. | |
| Exhaust hose is not connected or is blocked. Turn off the unit, disconnect the hose, check for blockage and reconnect the hose. | |
| Temperature setting is too high; decrease the set temperature. | |
| Make sure all windows and doors are closed. | |
| The room area could be too large; doublecheck the cooling area. | |
| Check the room for possible heat sources and remove them if possible. | |
| The unit is noisy and / or vibrates too much | The floor is not level. Place the unit on a flat, level surface. |
| The air filter is blocked with dust or animal hair. Turn off the unit and clean the filter according to the instructions. | |
| The unit makes a gurgling sound | This sound is caused by the refrigerant flow inside the unit and is normal. |
| Unit will not connect to Wireless or App does not work (some models) | For additional support and troubleshooting tips, follow the link in the QR code: |