Manual for BW10

INTRODUCTION

Welcome and thank you for choosing a TOSHIBA product.

For your convenience, your TOSHIBA product is furnished with two guides:
a) Quick Start Guide, and
b) this comprehensive PDF User's Manual.

Please read these instructions carefully before using the camcorder. Keep this Manual in a safe place for later reference.

Symbols used in this manual

HINT Points giving some extended instructions or special points to pay attention to.

CAUTION Points that require special attention.

(page xx) Refer to the page indicated for detailed information.

SHOOT, PLAY BACK AND SAVE

BEFORE RECORDING IN WATER

Make sure that the slot cover and the terminal cover are closed. If a cover is open, water will get inside the camcorder and damage it. When closing the slot cover and terminal cover, make sure that no foreign object such as sand, hair, dust, etc. is caught in the rubber seal.

There are places in the camcorder where water might accumulate, but this will not affect its waterproof properties.

PREPARE THE BATTERY PACK AND CARD

When using for the first time

The battery pack is already installed in the camcorder. Remove the battery pack from the camcorder, remove the insulating seal, and reinstall the battery pack in the camcorder.

Installing the battery pack and card

Install the card and the supplied battery pack.

• The card is not an included accessory. Please purchase a commercially sold card.
• The camcorder has an internal memory, which means that you can record and save the recorded data even if no card is installed.

Charging the battery pack

1. Press the power button to turn off the camcorder. It is not possible to charge the battery pack while the camcorder is on.
2. Use the dedicated USB interface cable (supplied) to connect the camcorder to a computer.
3. Turn on the computer. Charging begins. During charging, the multi-indicator is lit orange. When charging is completed, the indicator turns off. The charging time is approx. 220 minutes.

Shooting

1. Press the POWER button for at least 1 second to turn the camcorder on.
2. Record a video clip by pressing the [] button to begin and pressing it again to end. Take a photo by pressing the [] button.

Playback

1. Press the play [] button.
2. Select the image to play back using the arrow keys.
3. Press the OK button to play the selected file.

Deleting files

1. Move the orange frame to the file to delete and press the MENU button.
2. Select "DELETE SINGLE", and press the OK button.
3. Press the MENU button when finished.

Copy data from your camcorder to the computer

1. Turn on the computer and connect the camcorder using the USB cable.
2. Turn on the camcorder. The USB Connection Screen appears.
3. Select "COMPUTER", and press OK.
4. Select "CARD READER", and press OK.
5. Copy data from your camcorder to a computer.

Dismounting the camcorder

1. Left-click the safely removing hardware icon in the task tray.
2. Left-click the camcorder drive (E:).