Brand: TOSHIBA
Category: DVD Player
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for SD-43HT
Uploaded: Nov. 21, 2025, 7:07 p.m.
Warranty Information
One-year limited warranty against defects in materials or workmanship, with option for repair or exchange.
DVD Playback: Insert disc, press OPEN/CLOSE, place disc with label up, press OPEN/CLOSE again. Playback starts. Press PLAY/PAUSE to pause, STOP to stop. MP3/WMA CD Playback: Insert disc, press PLAY/PAUSE. Use remote to navigate tracks. Setup: Press SETUP in stop mode, use navigation buttons to select menu items and settings, press ENTER to confirm. Radio Operation: Press TUNER, select station manually or use Auto Station/Preset.
Troubleshooting and error codes
| Symptom | Cause | Correction |
|---|---|---|
| No power. | The power cord is disconnected. | Plug the power cord into the wall outlet securely. |
| The DVD receiver does not work. | No disc is inserted. | Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) |
| No picture. | The TV is not set to receive DVD signal output. | Select the appropriate video input mode on the TV so the picture from the DVD receiver appears on the TV screen. |
| The video cable is not connected securely. | Connect the video cable into the jacks securely. | |
| The connected TV power is turned off. | Turn on the TV. | |
| No sound. | The equipment connected with the audio cable is not set to receive DVD signal output. | Select the correct input mode of the audio receiver so you can listen to the sound from the DVD receiver. |
| The audio cables are not connected securely. | Connect the audio cable into the jacks securely. | |
| The power of the equipment connected with the audio cable is turned off. | Turn on the equipment connected with the audio cable. | |
| The Digital Audio Output is set to the wrong position. | Set the Digital Audio Output to the correct position, then turn on the DVD receiver again by pressing On/Standby (1). | |
| The playback picture is poor. | The disc is dirty. | Clean the disc. |
| The DVD receiver does not start playback. | No disc is inserted. | Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) |
| An unplayable disc is inserted. | Insert a playable disc. (Check the disc type, color system and Regional code.) | |
| The disc is placed upside down. | Place the disc with the playback side down. | |
| The disc is not placed within the guide. | Place the disc on the disc tray correctly inside the guide. | |
| The remote control does not work properly. | The disc is dirty. | Clean the disc. |
| The Rating level is set. | Cancel the Rating function or change the rating level. | |
| The remote control is not pointed at the remote sensor of the DVD receiver. | Point the remote control at the remote sensor of the DVD receiver. | |
| The remote control is too far from the DVD receiver. | Operate the remote control within about 23 ft (7 m). | |
| There is an obstacle in the path of the remote control and the DVD receiver. | Remove the obstacle. | |
| The batteries in the remote control are exhausted. | Replace the batteries with new ones. |