Brand: TOSHIBA
Category: Television
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 32A41
Uploaded: Nov. 21, 2025, 9:20 p.m.
Warranty Information
This Toshiba TV comes with a limited one-year warranty on parts and labor and a two-year warranty on the picture tube.
Turning the TV on/off: Press the POWER button on the remote control. Use the VOLUME buttons to adjust the sound level.
Selecting Channels: Use the CHANNEL ▲/▼ buttons to scan through programmed channels, or enter the channel number directly using the number buttons.
Selecting Video Input: Press the TV/VIDEO button to cycle through available video inputs (VIDEO 1, VIDEO 2).
Using the Menu: Press the MENU button to access Picture, Audio, Setup, or Option menus. Use the arrow buttons to navigate and adjust settings.
Remote Control Functions: The TV remote can also operate VCRs or cable TV converters after setting the TV/CABLE/VCR switch and programming the remote if necessary.
Troubleshooting and error codes
| Problem | Checks and Adjustments | Page |
|---|---|---|
| TV will not turn on | • Make sure the power cord is plugged in, and then press POWER. | 15 |
| • The remote control batteries may be dead. Replace the batteries. | 8 | |
| No picture, no sound | • Check the antenna/cable connections. | 5 |
| No sound, picture OK | • The sound may be muted. Press VOLUME . | 15 |
| • The station may have broadcast difficulties. Try another channel. | 18 | |
| • Make sure the MTS feature is set correctly. | 24-25 | |
| Poor sound, picture OK | • The station may have broadcast difficulties. Try another channel. | 18 |
| • An appliance near the TV may be causing interference. Move or turn off the appliance. | ||
| Poor picture, sound OK | • Check the antenna/cable connections. | 5 |
| • The station may have broadcast difficulties. Try another channel. | 18 | |
| • An appliance near the TV may be causing interference. Move or turn off the appliance. | ||
| • Adjust the Picture menu. | 20 | |
| Poor reception of broadcast channels | • The station may have broadcast difficulties. Try another channel. | 18 |
| • Check the antenna connections. | 5 | |
| • If using a VCR, make sure the TV/VCR button is set correctly. | 10 | |
| No UHF, VHF OK | • Make sure the TV/CABLE function is set to the mode that corresponds to the signal source type (cable company or outside antenna). | 16 |
| Black box appears on the screen | • The Closed Caption Text feature (T1, T2, T3, or T4) may be on. Set the Closed Caption feature to OFF. | 27 |
| Cannot select a certain channel | • The channel may be locked out by the BLOCK CHANNEL function. Unblock the channel. | 31 |
| • The channel may have been erased from the channel memory by the ADD/ERASE function. Reprogram the channel into channel memory. | 16-17 | |
| Multiple images (ghosts) | • The station may have broadcast difficulties. Try another channel. | 18 |
| • Antenna reception may be poor. Use a highly directional outdoor antenna. | ||
| Poor color or no color | • The station may have broadcast difficulties. Try another channel. | 18 |
| • An appliance near the TV may be causing interference. Move or turn off the appliance. | ||
| • Adjust the TINT and/or COLOR in the Picture menu. | 20 | |
| • If you change the direction of the TV while the TV is on, the picture may suffer from color shading. Turn off the TV and allow it to cool for about 30 minutes; then turn it on again. | ||
| No stereo or SAP sound from an MTS broadcast | • Make sure the MTS feature is set correctly. | 24-25 |
| The remote control does not operate | • Make sure the TV/CABLE/VCR switch is set correctly. | 10 |
| • There may be an obstruction between the remote control and the TV. Remove the obstruction and retry the remote control. | ||
| • The remote control batteries may be dead. Replace the batteries. | 8 |