Manual for TD-E493E / TD-E493

Name: Manual for TD-E493E / TD-E493
Brand: TOSHIBA
Availability: InStock

Brand: TOSHIBA

Category: Television

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 6:04 p.m.

Warranty Information

Information on warranties and service can be found at www.toshiba.eu/services.

Display On/Off: Press the center of the joystick to turn the display on. Press and hold the center of the joystick for a few seconds to turn the display off (standby mode).

Source Selection: Press the center of the joystick to display the source list. Use the up/down buttons to scroll and select.

Volume Control: Push the joystick right to increase volume, left to decrease.

Remote Control: The remote control provides access to all functions, including standby, menu navigation, picture/sound settings, and source selection.

First Time Installation: Upon first use, follow the on-screen prompts to select language, country, set a PIN, and configure initial settings like signage and network.

Media Playback: Connect USB devices to play photo, music, and video files through the Media Browser.

Connectivity: Connect via wired (Ethernet) or wireless (Wi-Fi) networks. Supports internet browsing and audio/video sharing.

Troubleshooting and error codes

Trouble Shooting & Tips
Display does not turn on	Make sure the power cord is plugged in securely to the mains socket. Check if batteries are of the remote exhausted. Press the Standby button on the Display.
No picture	This means your Display is not receiving any signal. Check if the correct source is selected. Check if the connection cable is plugged in properly. Check if the connection cable is damaged. Check if suitable cables are used for connection.
No sound	Check if the Display is muted. Press the Mute button or increase the volume to check. Sound may be coming from only one speaker. Check the balance settings from Sound menu.
Remote control - no operation	The batteries may be exhausted. Replace the batteries.
Input sources - can not be selected	Check the AV cables and connections if you are trying to switch to the input source dedicated to the connected device.