Manual for 8 IN 1

Setting Up Your Remote Control

1. Ensure 2 AAA batteries are correctly inserted.
2. Turn on the device you wish to control.
3. Find your device's brand in the manual's code list and note the 3-digit code. If your brand isn't listed, try 'Philips' codes.
4. Press and hold the SET key, then press the device key (e.g., TV). The LED will light up.
5. Enter the 3-digit code within 10 seconds. The LED will turn off if accepted. If it flashes, the code wasn't accepted; try the next code.
6. Test the remote's functions. If some keys don't work, repeat steps 4-7 with another code.
7. To exit setup mode, press the device key.

Automatic Search Setup

1. Turn on the device. Insert a video tape if it's a VCR.
2. Point the remote at the device. Press and hold SET and the device key (e.g., TV) for 3 seconds.
3. The LED will flash. The remote sends OFF signals. When the device turns off, press the device key to save the code.
4. Turn the device back on. Check key functions. If issues persist, restart the search.

Manual Search Setup

1. Turn on the device.
2. Point the remote at the device. Press and hold SET, then briefly press the device key (e.g., TV). The LED will stay on.
3. Press the POWER key (or PLAY for VCR/DVD/CD). The LED will flash.
4. Test keys. If they don't work, press POWER for the next code. If the device turns off, press the device key to save.