Brand: VRA
Category: Refrigeration
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for OPEN FRONT COOLER
Uploaded: April 20, 2026, 8:06 p.m.
Warranty Information
Refer to the manufacturer for warranty details as it is not specified in this manual.
Installation: Ensure the unit is placed on a level surface away from heat sources, with adequate ventilation. Secure the unit using the brakes on the rollers. Connect the unit to a properly grounded electrical outlet. Do not use extension cords.
Operation: Load products ensuring they do not block the ventilation grid. The unit is designed for packaged products.
Maintenance: Regularly clean the condenser grill and the interior/exterior of the display. Disconnect power before any maintenance.
Operation: Load products ensuring they do not block the ventilation grid. The unit is designed for packaged products.
Maintenance: Regularly clean the condenser grill and the interior/exterior of the display. Disconnect power before any maintenance.
Troubleshooting and error codes
| PROBLEM | PROBABLE CAUSE | ACTION |
| The machine doesn't cool | There's no power supply | Make sure that the plug, fuse and wall plug work correctly. |
| The machine doesn't reach the set temperature | The unit is located in a hot place. | Change the location of the unit or remove the heat source. |
| There's no enough air passing through the condenser. | Check the minimum distances (see point 3.1.4). | |
| The air intake openings are blocked by product. | Remove the product that is blocking the air openings. |