Brand: WASPcam
Category: Action Camera
Document Type: Manual
Language: EN
Manual for 9905
Uploaded: Aug. 10, 2025, 12:38 a.m.
Warranty Information
Cobra Electronics is not responsible for any damage or personal injuries resulting from the use of the WASPcam™ 9905 Wi-Fi.
- Turning On/Off: Press and hold the Power Button for 3 seconds.
- Recording Video: In video mode, press the Record Button to start and stop recording.
- Taking Photos: In photo mode, press the Record Button to take a photo.
- Switching Modes: Use the Mode Button to switch between picture, video, and playback modes.
- Menu Navigation: Press the Menu Button to enter settings. Use Left/Right arrow buttons to navigate and OK Button to confirm.
- Inserting Micro SD Card: Ensure the camera is off, open the back cover, slide the card lock, insert the card, and secure the lock. A Class 10 card, max 32GB, is required.
- Charging: Connect the camera to a power source using the USB cable. The red indicator light shows charging status.
- Using Wi-Fi: Enable Wi-Fi in system settings. Connect your smartphone to the 'WASPcam' network using the default password '12345678'. Open the WASPcam App for remote control.
Troubleshooting and error codes
| Issue | Solution |
|---|---|
| If Camera Does Not Turn On | The battery may be depleted. Charge the battery. |
| Cannot record video or take photos | The Micro SD card may be full or not inserted correctly. Insert a compatible Micro SD card or delete files. |
| Camera does not respond | The camera may be frozen. Press and hold the Power Button for 10 seconds to force a shutdown, then restart the camera. |
| Video or photos are corrupted | The Micro SD card may be damaged or not properly inserted. Ensure the card is inserted correctly and try a different card. |
| Cannot connect to Wi-Fi | Ensure Wi-Fi is enabled on the camera. Check that your smartphone is within range. Ensure you are using the correct network name (WASPcam) and password (12345678). |