Brand:
Whirlpool
Category: Dryers
Document Type: Manual
Language: EN
Manual for GGW9200L & GEW9200L
Uploaded: Nov. 21, 2025, 8:36 p.m.
Manual Publish Date: 2001-01-01
Warranty Information
One year warranty on mechanical/electrical parts; two years on electronic control board; five years on porcelain top.
The "Duet™ Gas and Electric Dryers" Job Aid provides technicians with operational and service information. It is intended as a training aid and service manual. For model-specific details, consult the "Use and Care Guide" or "Tech Sheet." Wiring diagrams are for training only; always use the diagram supplied with the product. The goal is to enable service technicians to properly diagnose and repair Whirlpool Gas and Electric Dryers, emphasizing safety, troubleshooting, and repair procedures.
Troubleshooting and error codes
| PROBLEM | POSSIBLE CAUSE/TEST |
|---|---|
| Unit will not power up. |
1. Check the 120 VAC electrical supply. 2. Check the wiring harness connections. 3. Check the control electronics. |
| Unit will not cycle when Start pushbutton is pressed. |
1. Be sure to hold the Start pushbutton down for 3 seconds. 2. Check the wiring harness connections. 3. If the displayed number flashes, make sure the door is completely closed. Press and hold the Start pushbutton down for 3 seconds. |
| Unit will not turn off. |
1. Test the Pause/Cancel pushbutton. 2. Check the control electronics and housing. 3. Check the moisture sensor. |
| The control panel will not accept commands. |
1. Check the control electronics and housing. |
| The unit will not heat. |
1. Check the heater voltage. 2. Check the wire connections to the heater. |
| The unit heats during the “air” cycle. |
1. Check the thermistor. |
| The unit turns off before the clothes are dry. |
1. Check the moisture sensor. |