Brand: YAMAHA
Category: Audio/Video
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for DVD-E600
Uploaded: Nov. 21, 2025, 9:19 p.m.
Warranty Information
No warranty period is specified in this manual.
Introduction: Covers basic operation, region codes, and symbols used.
Preparation: Details general connection notes, digital and analog connections (S-Video, Composite, Component, SCART), and remote control setup.
Operation: Explains basic playback, video and audio controls, repeat/shuffle functions, disc resume, and OSD functions including title/chapter selection, time search, and audio/subtitle/angle selection.
Picture CD & MP3 Playback: Covers playback of JPEG and MP3 files, including navigation, play modes, special JPEG features (thumbnails, zoom, rotate), and MP3 features.
Setup Menu: Guides through basic setup, General Setup (Disc Lock, Program, OSD Language, Screen Saver), Audio Setup (Speaker, Digital Audio, Equalizer, 3D), Video Setup (TV Type, TV Display, Closed Caption, Component, Progressive), and Preference Setup (Audio, Subtitle, Disc Menu languages).
Troubleshooting: Provides solutions for common problems like no power, no picture, distorted picture, no sound, disc issues, and remote control problems.
Specifications: Lists technical details for playback system, video performance, audio format, audio performance, and connections.
Troubleshooting and error codes
| Problem | Solution |
|---|---|
| No power | - Check if the AC power cord is properly connected. - Check if the TV is switched on. |
| No picture | - Check the video connection. - If Progressive Scan connections were not used and there is no picture, follow steps to turn off Progressive Scan (press OPEN/CLOSE, press ►/II, press MUTE). |
| Distorted picture | - The disc is badly scratched or dirty. - Sometimes a small amount of picture distortion may appear. This is not a malfunction. |
| Completely distorted picture or black/white picture with DVD or Video CD | Make sure the PAL/NTSC setting at the DVD player matches the video signal of your television. (See PAL/NTSC CONVERSION) |
| No sound or distorted sound | - Adjust the volume. - Check that the speakers are connected correctly. |
| No audio at digital output | - Check the digital connections. - Check if your receiver can decode MPEG-2 and if not, please make sure the digital output is set to PCM. - Check if the audio format of the selected audio language matches your receiver capabilities. |
| Disc can't be played | - The DVD+R/DVD+RW/DVD-R/DVD-RW/CD-R/CD-RW must be finalized. - Ensure the disc label is facing up. - Check if the disc is defective by trying another disc. - If you have recorded this particular Picture CD or MP3 CD yourself, please ensure that your disc contains at least about 6~10 pictures or 3~5MP3 music tracks before using it with the player. |
| No return to start-up screen when disc is removed | - Reset the unit by switching the player off, then on again. |
| The player does not respond to the remote control | - Aim the remote control directly at the sensor on the front of the player. - Reduce the distance to the player. - Replace the batteries in the remote control. - Insert the batteries with their polarities (+/- signs) as indicated. |
| Buttons do not work | - In order to completely reset the player, unplug the AC cord from the AC outlet. |
| Player does not respond to some operating commands during playback | - Operations may not be permitted by the disc. Refer to the instructions of the disc. |
| DVD Video player cannot read CDs/DVDs | - Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD Video player for repair. |
| Cannot record MP3 | - SCMS copy protected discs cannot be recorded digitally. Try recording by analog jacks. |