Brand: YAMAHA
Category: Audio/Video
Document Type: Parts/Service
Language: EN
Available Languages: EN , ES
Brand: YAMAHA
Category: Audio/Video
Document Type: Parts/Service
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 7 p.m.
This manual does not contain specific warranty information.
| No. | Symptoms | Diagnosis Contents | Possible Defective Points |
|---|---|---|---|
| 1 | The power is not turned on. | "Check the voltage of AT+3.3V, -28V and FL-DC+/- on the POWER P.C.B. Ass'y." Are wires of output connector CP502 on the POWER P.C.B. Ass'y and CP4003 on the DVD P.C.B. Ass'y disconnected or damaged ? | POWER P.C.B. Ass'y Connector CP502 on the POWER P.C.B. Ass'y and CP4003 on the DVD P.C.B. Ass'y. Cable (From POWER P.C.B. Ass'y to DVD P.C.B. Ass'y). |
| 2 | An opening screen is not displayed on the monitor. (The FL display (V651) lights. The mechanism does not work.) | Check that the voltage at IC651-pin 10 (K 1) on the OPERATION 1 P.C.B. Ass'y "becomes about 2.7V when the POWER key (SW667, OPERATION 2 P.C.B. Ass'y)" is pressed and 0 V when it is released. | Tact SW (SW660,662,664,665,667) on the OPERATION 2 P.C.B. Ass'y. (when operation of only the POWER key on the main unit is not accepted) |
| 3 | A tray cannot be opened. (An opening screen is displayed on the monitor) | Check that the voltage at OS651-pin 1 (IR) on the OPERATION 1 P.C.B. Ass'y is in the range between 0 and 3.3 V while receiving signals from the Remote Control when any key on it is pressed. | Remote receiver section on the OPERATION 1 P.C.B. Ass'y. (when operation of only the POWER key on the Remote Control is not accepted) |