Brand: YAMAHA
Category: Audio/Video
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for VS-10
Uploaded: Nov. 21, 2025, 7:04 p.m.
Warranty Information
Warranty information is not explicitly detailed in the provided pages of this manual.
Enjoying the Home Theater Sound System
This section describes how to select the input source to enjoy the sound from a TV, VCR, DVD player, satellite tuner or video game player with the VS-10 and to adjust the volume.
First turn on the power of the playback component and the TV, and then follow the steps described below:
- Press POWER on the control center and press ⁄⁄ on the remote control to turn on the power.
- Press the INPUT or AV selector button. Each time the button is pressed, the input is switched in the order: VIDEO 1 → TV → VIDEO 2 → DIGITAL 1 → DIGITAL 2.
- Adjust the level using VOLUME ∧∨ (or VOL + / - on the remote control). Pressing VOLUME ∧ (or VOL + on the remote control) increases the level, while pressing VOLUME ∨ (or VOL - on the remote control) decreases the level.
CAUTION: When the "TV", "VCR" or "CBL" button on the remote control is pressed to control another unit, the remote control can not control the VS-10. In this case, press the "VS10" button on the remote control and operate the VS-10.
Troubleshooting and error codes
| SYMPTOM | CHECK | Refer to page |
|---|---|---|
| No sound output at all. | Is the AC power supply cord connected? | 14 |
| Is the TV or VCR connected correctly? | 10 | |
| Are the main speakers connected correctly? | 13 | |
| Is the input source selected correctly? | 17 | |
| Is the sound muted temporarily? | 19 | |
| Are the headphones connected? | 4 | |
| A "humming" noise is present. | Hum caused by external electromagnetic waves may be generated. Try inverting the right-left polarity of the power cord and re-insert into the AC outlet. | 14 |
| The unit is in Auto Power Off mode. | 24 | |
| Turn off the main power if the unit is not to be used for an extended period of time. | ||
| Is a tuner or TV that uses an indoor antenna located near the unit? Use of an outdoor antenna is recommended. | — | |
| The STANDBY indicator flashes slowly. | The unit is in Auto Power Off mode. Turn off the main power if the unit is not to be used for an extended period of time. | 24 |
| There is noise in the tuner or TV and the video image is unstable. | Is a tuner or TV that uses an indoor antenna located near the unit? Use of an outdoor antenna is recommended. | — |
| When using a DSP program | ||
| SYMPTOM | CHECK | Refer to page |
| Movie dialog and other audio is difficult to hear. | Is HALL, CONCERT/SPORTS or GAME selected? Select the other DSP program. | 21-22 |
| When using the remote control | ||
| SYMPTOM | CHECK | Refer to page |
| The remote control does not function properly. | Are the batteries used up? | 3 |
| Is the remote control pointed at the sensor? | 3 | |
| Is the remote control too far from or too close to the sensor? | 3 | |
| Is direct sunlight or other intense light (such as an inverter fluorescent lamp) striking the sensor? | 3 | |
| • Is another remote control being used at the same time? | 3 | |
| • Are the batteries inserted in the correct direction? | 2 | |
| Cannot control other component. | Is the remote control selector button "VS10" pressed? Press "VS10" when you want to control this unit after controlling another component. | 27 |
| Is the manufacturer code set correctly? | 27 | |
| Is the remote control selector button corresponding to the component to be controlled pressed? | 29-30 |