Brand: ZANUSSI
Category: Dishwasher
Document Type: Manual
Language: EN
Manual for ZDT 6053
Uploaded: Nov. 21, 2025, 7:09 p.m.
Warranty Information
Standard guarantee conditions are valid for 24 months from purchase date, covering faulty workmanship or materials.
Safety Instructions: Always read safety information before installation and use. Keep detergents out of reach of children.
Daily Use: Check salt and rinse aid levels. Load dishes, ensuring they don't impede spray arms. Use appropriate dishwasher detergent. Select a suitable wash program and start.
Loading: Remove large food scraps. Load items with openings downwards. Avoid overcrowding. Do not place unsuitable items in the dishwasher.
Programs: Select program based on soil level and type of load (e.g., Intensive, Normal, Quick 30 min, Bio, Rinse & Hold).
Maintenance: Clean external surfaces and control panel. Regularly clean filters. Perform a cleaning cycle every 3 months.
Troubleshooting: Refer to the manual for fault codes, common problems, and solutions before calling for service.
Troubleshooting and error codes
| continuous flashing of the indicator light of the running programme | The water tap is blocked or furred with limescale. | Clean the water tap. |
|---|---|---|
| continuous flashing of the indicator light of the running programme | The water tap is turned off. | Turn the water tap on. |
| continuous flashing of the indicator light of the running programme | The filter (where present) in the threaded hose fitting at the water inlet valve is blocked. | Clean the filter in the threaded hose fitting. |
| continuous flashing of the indicator light of the running programme | The water inlet hose has not been correctly laid or it is bent or squashed. | Check the water inlet hose connection. |
| continuous flashing of the indicator light of the running programme - 2 intermittent audible signals - 2 flashes of the END OF CYCLE indicator light | The sink spigot is blocked. | Clean out the sink spigot. |
| continuous flashing of the indicator light of the running programme - 2 intermittent audible signals - 2 flashes of the END OF CYCLE indicator light | The water drain hose has not been correctly laid or it is bent or squashed. | Check the water drain hose connection. |
| continuous flashing of the indicator light of the running programme - 3 intermittent audible signals - 3 flashes of the END OF CYCLE indicator light | Anti-flood device has activated. | Close the water tap and contact the Service Force Centre. |