Manual for ZE13921

Name: Manual for ZE13921
Brand: ZANUSSI
Availability: InStock

Brand: ZANUSSI

Category: Hob

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:59 p.m.

Switching On/Off: Turn the control knob clockwise to switch on and increase heat, counter-clockwise to decrease. Turn to '0' to switch off. The power indicator lights up when a zone is on and stays on until all zones are off.Automatic Switch Off: The hob will automatically switch off if a cooking zone is left on without cookware or if a zone is not switched off after a certain time. The control knob must be reset to 'off' before reuse.Cookware: For induction hobs, use cookware made of cast iron, steel, enamelled steel, stainless steel, or multi-layer bottoms. Ensure cookware has a flat, thick bottom and a minimum diameter (Front: 120mm, Rear: 145mm).Energy Saving: Always use lids on pots and place cookware on the zone before switching it on.

Troubleshooting and error codes

Problem	Possible cause and remedy
The appliance does not operate.	• Examine the fuse in the electrical system of the house in the fuse box. If the fuses blow time after time, speak to an authorised electrician. • Make sure that you plug in the appliance and switch the electrical supply. • Make sure that you turn correct control knob.
The plate does not heat up.	• Examine the fuse in the electrical system of the house in the fuse box. If the fuses blow time after time, speak to an authorised electrician. • Make sure that plate is clean and dry. • Make sure that the cooking pan is the correct size for the plate. • Make sure that cooking pan has a flat bottom. • Make sure that the setting is correct for type of cooking.
Results of plate are not satisfactory.	• The pot is not suitable. Use suitable cookware. • No cookware on the plate. Place cookware on the plate. • The diameter of the bottom of the cookware is too small for the plate. • Move onto a smaller plate. Use suitable cookware.
Acoustic warning (double acoustic signal) sounds.	• The pot is not suitable. Use suitable cookware. • No cookware on the plate. Place cookware on the plate. • The diameter of the bottom of the cookware is too small for the plate. • Move onto a smaller plate. Use suitable cookware.