Brand: ZANUSSI
Category: Hob
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for ZEE39211
Uploaded: Nov. 21, 2025, 7:05 p.m.
Warranty Information
Use the original spare parts only. They are available at Service Force Centre and approved spare parts shops.
Operation
To switch on and increase the heat setting turn the knob counterclockwise. To decrease the heat setting turn the knob clockwise. To switch off turn the knob to the 0. Power indicator is activated when either of the zones are turned on, and will stay on until the cooking zones are switched off.Before first use
Put cookware containing water on each cooking zone, set the maximum position and operate the appliance for 10 min. This is to burn off the residue in the appliance. After that, operate the appliance at minimum position for 20 min. During this period, an odour and smoke can occur. This is normal. Make sure that the airflow is sufficient.Rapid hot plate
A red dot in the middle of the plate shows a rapid hot plate. A rapid hot plate heats up faster than usual plates. The red dot is painted on the surface and can come off after some time. It does not have an effect on the performance of the appliance. The rapid hot plate can smoke and make an odour when you use it for the first time. The smoke and an odour will go off after a while.Troubleshooting and error codes
| Problem | Possible cause and remedy |
|---|---|
| The appliance does not operate. | • Examine the fuse in the electrical system of the house in the fuse box. If the fuses blow time after time, speak to an authorised electrician. • Make sure that the appliance is plugged in and the electrical supply is switched on. |
| The cooking zone does not heat up. | • Make sure that you turn the correct control knob. • Examine the fuse in the electrical system of the house in the fuse box. If the fuses blow time after time, speak to an authorised electrician. |
| The effectiveness of the hob is not satisfactory. | • Make sure that the hob is clean and dry. • Make sure that the cookware is the correct size for the cooking zone. • Make sure that the cookware has a flat bottom. • Make sure that the heat setting is correct for this type of cooking. |