Brand: ZANUSSI
Category: Hob
Document Type: Manual
Language: EN
Manual for ZGG62414
Uploaded: Nov. 21, 2025, 9:11 p.m.
Warranty Information
None
- Ignition of the burner: Turn the control knob counterclockwise to the maximum position and push it down. Keep it pushed for approximately 5 seconds to let the thermocouple warm up. Adjust the flame after it is regular.
- Turning the burner off: Turn the knob to the symbol indicating no gas supply/off position.
- Energy savings: Use lids on pans, reduce flame to simmer once boiling, and use cookware with diameters applicable to burner size.
Troubleshooting and error codes
| Problem | Possible cause | Remedy |
|---|---|---|
| There is no spark when lighting the gas | There is no electrical supply | Make sure that the unit is connected and the electrical supply is switched on. Control the fuse. If the fuse is released more than one time, refer to a qualified electrician. |
| The flame is blow out immediately after ignition | Burner cap and crown are placed uneven | Make sure that the burner cap and crown are in correct positions. |
| Thermocouple is not heated sufficient | After lighting the flame, keep the knob pushed for approximately 5 seconds. | |
| The gas ring burns unevenly | Burner crown is blocked with food residues | Make sure that the injector is not blocked and the burner crown is clear of food particles. |