Brand: ZANUSSI
Category: Oven
Document Type: Manual
Language: EN
Available Languages: EN , ES
Uploaded: Nov. 21, 2025, 7:10 p.m.
Warranty information is not explicitly detailed in the provided pages.
Initial cleaning: Remove all accessories and clean the appliance.
Setting the time: Connect appliance or after power cut, the time indicator flashes. Press + or - to set time. It stops flashing after five seconds.
Preheating: Preheat the empty appliance for 45 mins (with a specific function and max temp), then for 15 mins (with another specific function and max temp).
Activating/Deactivating: Push the knob to activate. Turn the oven function knob to desired function. Turn the temperature knob to desired temperature. To deactivate, turn both knobs to Off.
| Problem | Possible cause | Remedy |
|---|---|---|
| The oven does not heat up. | The appliance is deactivated. | Activate the appliance. |
| The oven does not heat up. | The clock is not set. | Set the clock. |
| The oven does not heat up. | The necessary settings are not set. | Make sure that the settings are correct. |
| The oven does not heat up. | The fuse in the fuse box is released. | Do a check of the fuse. If the fuse is released more than one time, contact a qualified electrician. |
| The oven lamp does not operate. | The oven lamp is defective. | Replace the oven lamp. |
| The display shows 12.00. | There was a power cut. | Set the clock. |
| Steam and condensation settle on the food and in the oven. | You left the dish in the oven for too long. | Do not keep the dishes in the oven for longer than 15 - 20 minutes after the cooking ends. |