Manual for ZOP38903

Manual for ZOP38903

Brand: ZANUSSI

Category: Oven

Document Type: Manual

Language: EN

Available Languages: EN , ES

Uploaded: April 20, 2026, 7:49 p.m.

Warranty Information

Refer to the warranty card for specific warranty details and duration.

Operation Summary

Safety Information

  • Read instructions before installation and use.
  • Keep children and vulnerable people supervised.
  • General safety precautions include qualified installation and correct electrical connections.
  • Always use oven gloves when handling hot items.
  • Do not use steam cleaners or abrasive materials.
  • Follow specific instructions for pyrolytic cleaning.

Daily Use

  • Set the clock time before operation.
  • Preheat the oven as instructed.
  • Refer to the display and buttons for operating the oven.
  • Various oven functions are available (True Fan Cooking, Conventional Cooking, Grilling, etc.).
  • Clock functions include Time of day, Minute Minder, Duration, and End.

Care and Cleaning

  • Deactivate the appliance before cleaning.
  • Clean with a moist soft cloth and neutral detergents.
  • Special procedures for pyrolytic cleaning and cleaning the oven door.
  • Replace the lamp following safety instructions.

Troubleshooting

  • Check common problems like the oven not heating up or the lamp not operating.
  • Contact customer care for unresolved issues.

Troubleshooting and error codes

Problem Possible cause Remedy
The oven does not heat up. The oven is deactivated. Activate the oven.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not set. Make sure that the settings are correct.
The oven does not heat up. The automatic switch-off is activated. Refer to "Automatic switch-off".
The oven does not heat up. The Child Lock is on. Refer to "Using the Child Lock".
The oven does not heat up. The fuse is released. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
The oven does not heat up. The fan does not operate. The display shows ➔ or ⓕ. The demo mode is activated.

1. Deactivate the oven.
2. Press and hold ⓕ for approximately two seconds. An acoustic signal sounds.
3. Press and hold ⓕ and ⓣ at the same time until the acoustic signal sounds again and the indicator goes out.
The display shows an error code that is not in this table. There is an electrical fault.

Deactivate the oven with the house fuse or the safety switch in the fuse box and activate it again.
If the display shows the error code again, contact the Customer Care Department.
It takes too long to cook the dishes or they cook too quickly. The temperature is too low or too high. Adjust the temperature if necessary. Follow the advice in the user manual.
Steam and condensation settle on the food and in the cavity of the oven. You left the dish in the oven for too long. Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends.
Privacy Policy