Brand: ZANUSSI
Category: Tumble Dryer
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for TDE 4224
Uploaded: April 20, 2026, 7:54 p.m.
Getting Started: First-time use requires drying a few damp cloths for 30 minutes to remove dust. Drying Process: Connect the appliance, open the door, load items loosely, close the door, press ON/OFF, select the desired drying programme or time, press the low temperature or buzzer OFF buttons if needed, and press Start for 2 seconds. The drum turns in both directions. All programmes end with a 10-minute cooling phase. After Use: Turn the programme selector dial to "0", switch off by releasing the ON/OFF button, and clean the filters. If the cycle is interrupted, turn the dial to cooling phase before removing laundry. To change a programme, cancel by turning the dial to "0", select the new programme, and press Start.
Troubleshooting and error codes
| Problem | Possible cause |
|---|---|
| The dryer does not work: |
• The door is open. • The plug is not fitted into the wall socket. • There is no electricity supply from the wall socket. • The selector dial is not set correctly. • The start button has not been depressed. |
| The dryer does not dry properly: |
• The filters are clogged. • The selected cycle is not suitable for the laundry. • The laundry has not been spun properly. • The low temperature function has been selected. • Excessive laundry load. • The dryer is not correctly installed. |