Manual for ZDC8203W

Manual for ZDC8203W

Brand: ZANUSSI

Category: Tumble Dryer

Document Type: Manual

Language: EN

Uploaded: Nov. 21, 2025, 7:28 p.m.

Warranty Information

Refer to the warranty card for detailed warranty information.

Starting a Programme without Delay Start:

  1. Prepare and load laundry.
  2. Press the On/Off button.
  3. Select the appropriate programme and options. The display will show the programme duration.
  4. Touch the Start/Pause button.

Starting a Programme with Delay Start:

  1. Select the programme and options.
  2. Touch the Delay Start button repeatedly until the desired start time is displayed.
  3. Touch the Start/Pause button. The countdown will be displayed. The programme starts automatically after the countdown.

Changing a Programme:

  1. Press the On/Off button to switch off.
  2. Press the On/Off button to switch on.
  3. Select the programme.

Programme End:

  • An intermittent beep will sound.
  • The Filter and Water Container indicator lights will illuminate.
  • The Start/Pause indicator light will be on.
  • The appliance continues in the anti-crease phase for about 30 minutes.

Troubleshooting and error codes

Problem Possible Solution
The appliance cannot be activated. Ensure the mains plug is in the socket. Check the fuse in the household installation.
The programme does not start. Press Start/Pause.
The appliance door does not close. Ensure the door is closed. Ensure the filter is correctly installed. Ensure laundry is not trapped between the door and the rubber seal.
The appliance stops during operation. Ensure the water container is empty. Press Start/Pause to restart the programme.
A very long programme duration is displayed. 1) Ensure the laundry weight matches the programme duration.
A very short programme duration is displayed. Ensure the filter is clean. The laundry is too damp. Spin the laundry again in the washing machine.
Err is displayed. Ensure the room temperature is not too high.
E51 is displayed (e.g.). Select the Time programme or Extra Dry. To set a new programme, switch the appliance off and on again. Ensure the selected options are suitable for the programme. Switch the appliance off and on again. Start a new programme. If the problem persists, contact customer service.
Privacy Policy