Brand: ZANUSSI
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for 23xx 02 08 01
Uploaded: Nov. 21, 2025, 7:01 p.m.
Warranty Information
Warranty does not cover damage caused by improper use or unauthorized repairs.
Before operating the vacuum cleaner:
- Ensure filters are in place.
- Unwind cable to the yellow mark, do not exceed red mark.
- Press ON/OFF switch to turn on. Adjust power to MIN before switching on.
- To rewind cable, press button with foot and guide with hand.
- Adjust suction power using the power regulator.
Using the nozzles:
- Carpets: Use dual-purpose nozzle with lever in position (20). Reduce power for small carpets.
- Hard floors: Use dual-purpose nozzle with lever in position (21).
- Wooden floors: Use parquet nozzle (model dependent).
- Upholstered furniture/fabrics: Use upholstery nozzle (15). Reduce power if necessary.
- Crevices/corners: Use crevice nozzle (14).
- Turbo nozzle (13c): For stubborn fluff and pet hair on carpets. Do not use on animal skin rugs or carpet fringes. Do not hold stationary while brush is rotating. Avoid electric cables. Switch off immediately after use.
Maintenance:
- Replace dustbag when indicator is full.
- Clean/replace filters regularly (at least twice a year).
- Never operate without filters installed.
- Disconnect from power before cleaning/maintenance.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Cleaner stops automatically | Blockage in nozzle/tube/hose or blocked filters. | Disconnect from mains, allow to cool for 20-30 mins. Remove blockage and/or replace filters. Restart cleaner. |
| Loss of suction / dirty filters | Filters or dustbag are dirty/blocked. | Clean or replace filters. Replace dustbag if full. |