Brand: ZANUSSI
Category: Vacuum Cleaner
Document Type: Manual
Language: EN
Available Languages: EN , ES
Manual for ZAN1210
Uploaded: Nov. 21, 2025, 9:22 p.m.
Warranty Information
The warranty period is 12 months from the date of purchase, with specific terms and conditions.
Instructions for Use:
1. Ensure filters are correctly positioned.
2. Unwind cable to the YELLOW mark and plug into socket.
3. Press ON/OFF button to start. Full power achieved in 1-2 seconds.
4. To rewind cable, press button with foot and guide with hand.
5. Adjust suction power using the variable power control or the aperture on the hose handle.
1. Ensure filters are correctly positioned.
2. Unwind cable to the YELLOW mark and plug into socket.
3. Press ON/OFF button to start. Full power achieved in 1-2 seconds.
4. To rewind cable, press button with foot and guide with hand.
5. Adjust suction power using the variable power control or the aperture on the hose handle.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| The cleaner stops automatically | Blockage in nozzle/tube/hose or blocked filters. | Disconnect from mains, allow to cool for 20-30 minutes. Remove blockage and/or clean filters. Restart cleaner. |
| Reduced suction power | Clogged filters or full dust container. | Clean or replace filters. Empty dust container. |