Manual for ZAN1650

Starting your vacuum cleaner

1. Before operating, ensure filters are correctly in place.
2. Unwind the power cable to the ideal length (yellow mark), insert the plug into the socket. Do not extend beyond the red mark.
3. Press the ON/OFF button to switch on. Full power is reached in 1-2 seconds.
4. To rewind the cable, press the rewind button with your foot and guide the cable with your hand.

Emptying the dust container

• Never operate without the dust container installed.
• Empty the container when the electronic filter indicator illuminates at maximum power with the nozzle raised from the floor.
• Remove the dust container using the opening buttons.
• Empty contents by pressing the orange opening button.
• Close the container lid until it clicks.
• Reinsert the container until it clicks.

Replacing or cleaning filters

• Filters should be replaced at least twice a year or when visibly soiled.
• Always operate with filters installed.
• Disconnect from mains before changing filters.