Manual for ZAN3600

Before starting

1. Check that the dust bag and motor filter are in place.
2. Insert the hose until the catch clicks to engage (press the catch to release the hose).
3. Attach the extension wand or telescopic wand (only on certain models) to the hose handle and floor nozzle (to take them apart again, twist and pull).
4. Extend the cord and plug it into the wall socket. The vacuum cleaner has an integrated cord winder. To rewind the cable press the foot pedal (take hold of the plug to prevent it striking you).
5. Start the vacuum cleaner by rotating the power control button.
6. Adjust suction power using the power control button on the vacuum cleaner or the suction control on the hose handle.
7. A practical parking feature (as well as minimizing the risk of breakage) makes things easier when pausing during cleaning.
8. The parking feature makes it easier to move and store the vacuum cleaner.

Using the nozzles as follows:

• Carpets: Use the carpet/hardfloor nozzle with the lever in position (17). Reduce suction power for small carpets.
• Hard floors: Use the carpet/hardfloor nozzle with the lever in position (18).
• Wooden floors: Use the parquet nozzle (certain models only, 6).
• Special combined nozzle: Detach the nozzle from the accessory dock and use it for bookshelves (with folding out of the brush" end) or crevices, corners (with the „crevice" end) (8.)
• Using the turbo nozzle (certain models only) (7a) Attach the nozzle to the tube.

Note: Do not use the power or turbo nozzle on fur rugs, rugs with long fringes or a pile depth exceeding 15 mm. To avoid damaging the carpet, do not keep the nozzle stationary whilst the brush is rotating. Do not pass the nozzle across electric cables, and be sure to switch off the vacuum cleaner immediately after use.