Manual for 12 XP

Introduction: Study instructions thoroughly, familiarize yourself with features. Try out controls before loading film. Shoot a test film and examine results to correct errors.

Loading Film: Load in subdued light. Ensure Shutter Release Button indicator faces front. Depress Shutter Release Button, advance film transport lever if needed. Lift Rewind Knob to open back, insert film cassette, push Rewind Knob down. Draw out film leader, insert into Take-up Spool slots. Ease film forward with Transport Lever. Fire shutter, advance film with short strokes. Tighten film if needed. Close camera back, complete wind-on. Fire shutter again, advance film, set Frame Counter to zero. Set Film Speed Selector Dial.

Using the Camera: Set Speed Dial appropriately. Focus through Viewfinder, deciding composition. Focus by turning Focusing Ring until sharp. Use inner rings for critical focus.

Using the Meter: Focus, set Aperture Ring. Press Shutter Release halfway. Observe red lights: upper for over-exposure (turn Aperture Ring clockwise), lower for under-exposure (turn counter-clockwise). Turn until both lights flash. Adjust Shutter Speed Dial if necessary.