Brand: ANKO
Category: Clock Radio
Manual Type:
Language:
Manual for 42570417 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:51 p.m.
Warranty Summary
Kmart Australia Ltd warrants the product to be free from defects for 12 months from purchase, excluding defects from misuse or neglect.
Setting the Clock:
- Press the Power button to enter standby mode.
- Hold SET button, use << or >> to select 12H/24H, press SET to confirm.
- Use << or >> to set hours, press SET to confirm.
- Use << or >> to set minutes, press SET to confirm.
Setting the Alarm:
- Press the Power button to enter standby mode.
- Hold Alarm button (Alarm 1 or 2), set hour and minute as clock setting.
- Select alarm mode (buzzer or radio).
- Select wakeup volume.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected properly | Check power adapter connection |
| No sound from radio | Volume too low | Increase volume level |
| Poor radio reception | FM antenna not extended | Extend FM antenna fully |
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected properly | Check power adapter connection |
| No sound from radio | Volume too low | Increase volume level |
| Poor radio reception | FM antenna not extended | Extend FM antenna fully |