Brand: BAJAJ
Category: Motorcycle
Manual Type:
Language:
Manual for CT 100 SERIES - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:56 p.m.
Manual Publish Date: 2019-06-16
Warranty Summary
BAJAJ CT 100 / CT 110 motorcycle comes with a warranty of 5 Years or 75,000 Kms, whichever occurs earlier.
Starting the Engine:
- Turn the fuel tap knob to ON or RES position.
- Turn ignition switch key to 'ON' position.
- Confirm that transmission is in neutral.
- Use choke for cold starts.
- Keep throttle closed and operate self-start or kick-start.
- Release kick as soon as engine starts.
Shifting Gears:
- Close throttle and depress the clutch.
- Shift to next higher or lower gear.
- Open throttle and release clutch smoothly.
Braking:
- Close throttle completely.
- Apply both front and rear brakes simultaneously.
- De-clutch if necessary to avoid engine stalling.
Troubleshooting and error codes
| Problem | Possible Cause |
|---|---|
| Engine oil level low | Oil leakage or consumption |
| Battery discharged | Excessive use of electrical accessories, vehicle not used for long time |
| Tyre pressure low | Puncture, normal air leakage over time |
| Brakes dragging | Improper adjustment, worn brake components |
| Chain slack | Normal wear and tear, requires lubrication and adjustment |
Troubleshooting and error codes
| Problem | Possible Cause |
|---|---|
| Engine oil level low | Oil leakage or consumption |
| Battery discharged | Excessive use of electrical accessories, vehicle not used for long time |
| Tyre pressure low | Puncture, normal air leakage over time |
| Brakes dragging | Improper adjustment, worn brake components |
| Chain slack | Normal wear and tear, requires lubrication and adjustment |