Manual for STRETCH - Troubleshooting and error codes + PDF Download

To install the BeSafe Stretch car seat, first prepare the vehicle by adjusting the back seat and front passenger seat. Then, prepare the child seat by mounting the front brace and adjusting it to the desired leg space. Place the child seat in the vehicle, extend the floor support until it is in contact with the vehicle floor and shows green indicators. Secure the seat using the vehicle's 3-point belt, guiding the belt tongue through the belt guiders and tensioner-lock-off, and clicking it into the buckle. Tighten the belts and rotate the tensioner knob clockwise. Finally, connect and tighten the lower tethers. For removing the seat, release the lower tethers, release tension from the tensioner, unbuckle the vehicle belt, and retract the floor support.