Brand: BOSCH
Category: Washing Machine
Manual Type:
Language:
Manual for CLASSIXX 1400 EXPRESS WFO2867GB - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:45 p.m.
Warranty Summary
No warranty information is provided in this manual.
To operate the BOSCH CLASSIXX 1400 EXPRESS WFO2867GB washing machine, follow these steps:
- Sort Laundry: Separate clothes by color, fabric type, and degree of soiling.
- Load Washing Machine: Place sorted laundry into the drum, ensuring not to overload.
- Add Detergent: Pour appropriate detergent into dispenser II, and softener into dispenser ♻.
- Select Programme: Turn the programme selector to choose the desired wash cycle (e.g., Cottons, Easy-Care).
- Set Options (if needed): Adjust spin speed, temperature, or add options like 'Wash Plus' or 'Aqua Plus'.
- Start Washing: Press the Start button to begin the wash cycle.
- After Washing: Once the programme ends, remove laundry and leave the door slightly ajar to dry the drum.
Troubleshooting and error codes
| Problem | Possible Cause | Remedial action |
|---|---|---|
| Wash indicator light flashes | Door not closed properly. | Check whether laundry is trapped in door; Close the washing machine door. |
| Rinse indicator light flashes | Tap not turned on. | Turn the tap on. |
| Inlet hose kinked or pinched. | Eliminate cause. | |
| Filters blocked in water inlet hose. | Clean filters, see Page 25. | |
| Water pressure too low. | Eliminate cause. | |
| Spin indicator light flashes | Loose debris is blocking the pump. | Clean the pump, see Page 24. |
| Drainage pipe and/or drainage hose blocked. | Clean drainage pipe and/or drainage hose. |
Troubleshooting and error codes
| Problem | Possible Cause | Remedial action |
|---|---|---|
| Wash indicator light flashes | Door not closed properly. | Check whether laundry is trapped in door; Close the washing machine door. |
| Rinse indicator light flashes | Tap not turned on. | Turn the tap on. |
| Inlet hose kinked or pinched. | Eliminate cause. | |
| Filters blocked in water inlet hose. | Clean filters, see Page 25. | |
| Water pressure too low. | Eliminate cause. | |
| Spin indicator light flashes | Loose debris is blocking the pump. | Clean the pump, see Page 24. |
| Drainage pipe and/or drainage hose blocked. | Clean drainage pipe and/or drainage hose. |