Manual for T6-NHP01-A, T6-NAC01-A & T6-NRH01-B - Troubleshooting and error codes + PDF Download

Manual for T6-NHP01-A, T6-NAC01-A & T6-NRH01-B - Troubleshooting and error codes + PDF Download

Brand: bryant

Category: Thermostat

Manual Type:

Language:

Uploaded: April 7, 2025, 8:13 p.m.

Manual Publish Date: 2014-08-01

Warranty Summary

No warranty information is mentioned in this manual.
Download Manual

Setting Temperature:

  • Open the thermostat door.
  • Use the up/down buttons to adjust the heating or cooling temperature based on the current mode (heat or cool).
  • Press the 'mode' button to switch between heating and cooling settings.
  • Close the door to save settings.

Touch 'N' Go Presets (Home, Away, Sleep):

  • Press 'home', 'away', or 'sleep' buttons to quickly apply preset temperature settings for different scenarios.
  • To customize these presets, press and hold the desired button and adjust the temperature using up/down buttons, then press and hold the button again to save.

Fan Control:

  • Press the 'fan' button to toggle between 'auto fan' (fan runs only during heating/cooling cycles) and 'fan on' (continuous fan operation).

Troubleshooting and error codes

Problem Description
E1 System isn't communicating properly. Call your heating and cooling dealer for service.
-- Room air temperature sensor has failed. Call your heating and cooling dealer for service. OR Outdoor temperature sensor isn't working. Call your heating and cooling dealer for service.
E4 There's an internal memory failure. Call your heating and cooling dealer for service.
E5 The humidity sensor isn't working. Call your heating and cooling dealer for service.

Troubleshooting and error codes

Problem Description
E1 System isn't communicating properly. Call your heating and cooling dealer for service.
-- Room air temperature sensor has failed. Call your heating and cooling dealer for service. OR Outdoor temperature sensor isn't working. Call your heating and cooling dealer for service.
E4 There's an internal memory failure. Call your heating and cooling dealer for service.
E5 The humidity sensor isn't working. Call your heating and cooling dealer for service.